你害怕出現劣質真空斷路器容易造成燒壞甚爆炸等情況發生，會威脅財產和性命。還是認真選一下好的，來預防這些問題吧！MNS低壓抽屜柜作為低壓配電系統中的關鍵設備，廣泛應用于各類工業與民用建筑中。其合理選擇直接影響電力分配的性、可靠性與靈活性。那么我們就來看看怎么選。

You are afraid that low-quality vacuum circuit breakers can easily cause burns or even explosions, which could threaten property and life safety. It's better to carefully choose the good ones to prevent these problems! As a key equipment in low-voltage distribution systems, MNS low-voltage drawer cabinets are widely used in various industrial and civil buildings. The reasonable choice directly affects the safety, reliability, and flexibility of power distribution. So let's take a look at how to choose.

一、明確性能參數需求

1、 Clarify performance parameter requirements

根據實際用電負荷大小，確定 MNS 低壓抽屜柜的額定電流。一般來說，需計算所有用電設備的總功率，并結合同時使用系數，確保所選抽屜柜的額定電流能夠滿足長期穩定運行的需求。同時，要關注短路耐受電流指標，它反映了抽屜柜在短路故障時承受電流沖擊的能力。

Determine the rated current of the MNS low-voltage drawer cabinet based on the actual power load. Generally speaking, it is necessary to calculate the total power of all electrical equipment and combine it with the simultaneous use factor to ensure that the rated current of the selected drawer cabinet can meet the long-term stable operation requirements. At the same time, attention should be paid to the short-circuit withstand current index, which reflects the ability of the drawer cabinet to withstand current surges during short-circuit faults.

依據使用環境來確定合適的防護等級。如果是安裝在環境潔凈、干燥的寫字樓配電室，可選擇防護等級較低的 MNS 低壓抽屜柜，如 IP20，能防止直徑大于 12mm 的固體異物進入以及防止人體觸及內部帶電部分；而若應用于潮濕、多塵或有腐蝕性氣體的工業車間，就需要選擇防護等級更高的產品，像 IP54 甚 IP65，可有效防塵、防水和抵御腐蝕性氣體的侵害 。

Determine the appropriate level of protection based on the usage environment. If installed in a clean and dry office building distribution room, MNS low-voltage drawer cabinets with lower protection levels, such as IP20, can be selected to prevent solid foreign objects with a diameter greater than 12mm from entering and to prevent human contact with live parts inside; If applied to damp, dusty, or corrosive gas industrial workshops, it is necessary to choose products with higher protection levels, such as IP54 or even IP65, which can effectively prevent dust, water, and resist the invasion of corrosive gases.

二、考量功能需求

2、 Consider functional requirements

根據實際配電回路數量和用電設備的控制要求，確定抽屜單元的配置。MNS 低壓抽屜柜的抽屜單元具有模塊化設計特點，常見規格有 1/4 單元、1/2 單元、1 單元等。對于回路數量較多、容量較小的場所，可多配置 1/4 單元或 1/2 單元抽屜，提高空間利用率；對于大功率設備供電回路，則需要配置較大尺寸的 1 單元或 2 單元抽屜，以滿足電流承載和保護需求 。

Determine the configuration of drawer units based on the actual number of distribution circuits and the control requirements of electrical equipment. The drawer units of MNS low-voltage drawer cabinets have modular design features, with common specifications including 1/4 unit, 1/2 unit, 1 unit, etc. For places with a large number of circuits and small capacity, additional 1/4 or 1/2 unit drawers can be configured to improve space utilization; For high-power equipment power supply circuits, larger sized 1 or 2 unit drawers need to be configured to meet current carrying and protection requirements.

隨著智能化技術的發展，對 MNS 低壓抽屜柜的智能監測與控制功能需求日益增加?？蛇x擇具備智能型框架斷路器、電操機構、通信接口的抽屜柜，通過智能儀表實時監測電壓、電流、功率等電參數，實現遠程控制與故障報警功能。這不僅便于運維人員及時掌握設備運行狀態，還能提高電力系統的管理效率和自動化水平。

With the development of intelligent technology, the demand for intelligent monitoring and control functions of MNS low-voltage drawer cabinets is increasing day by day. Drawer cabinets with intelligent frame circuit breakers, electric operating mechanisms, and communication interfaces can be selected, and real-time monitoring of electrical parameters such as voltage, current, and power can be achieved through intelligent instruments to achieve remote control and fault alarm functions. This not only facilitates operation and maintenance personnel to timely grasp the operating status of equipment, but also improves the management efficiency and automation level of the power system.

考慮性價比

Consider cost-effectiveness

在滿足性能和功能需求的前提下，對不同和型號的 MNS 低壓抽屜柜進行比較。但不能僅以作為選擇依據，要綜合考慮產品質量、使用壽命、維護成本等因素，計算整體的性價比。有時候，選擇稍高但質量可靠、性能優越的產品，長期來看反而能降低使用成本 。

Compare the prices of MNS low-voltage drawer cabinets of different brands and models while meeting performance and functional requirements. But price alone cannot be used as the basis for selection. Factors such as product quality, service life, and maintenance costs should be comprehensively considered to calculate the overall cost-effectiveness. Sometimes, choosing products with slightly higher prices but reliable quality and superior performance can actually reduce usage costs in the long run.