1、用堿洗液清洗

1. Clean with alkaline solution

　　在機箱機柜制作成型后并沒有真正的完工，需要對它進行堿洗，肯定很多人會有疑問，為什么要對它進行堿洗？機箱機柜表面沾附很多油污，要售出的機箱機柜，我們就必須對其進行清潔工作，我們一道工序就是對它進行清洗。用堿洗液洗完還需用清水進行擦洗，目的是擦除堿洗液殘留物。

After the production of the chassis and cabinet, it is not truly completed and needs to be alkaline washed. Many people will definitely have questions, why do they need to be alkaline washed? There are many oil stains on the surface of the chassis and cabinet. To sell a perfect chassis and cabinet, we must clean it. Our final process is to clean it. After washing with alkaline solution, it is necessary to scrub with clean water to remove any residue from the alkaline solution.

　　2、使用去氧化膜

2. Using a de oxidation film

　　機箱外殼表面通過自然形成的氧化膜一般都不均勻且是非連續薄膜，在對機箱機柜表面涂裝時必須提前一步對它進行徹底的處理，對于壓鑄件來說可使用硝酸來對表面進行氧化膜處理。去除氧化膜后我們還需用清水進行進一步處理。

The naturally formed oxide film on the surface of the chassis casing is generally uneven and discontinuous. When painting the surface of the chassis cabinet, it must be thoroughly removed in advance. For die castings, nitric acid can be used to treat the surface with oxide film. After removing the oxide film, we need to further treat it with clean water.

　　3、進行化學轉化

3. Perform chemical transformation

　　進行完前面的幾步后，我們還要對它進行化學轉化處理，我們需要其表面能夠形成密而均勻的連續薄膜，這一步的工藝處理等同于對其進行磷化處理，但它們使用的溶液不同。機箱機的電子外殼轉化膜以鉻酸/鹽酸、磷酸/鹽酸和氟氫酸為基礎，轉化膜質量通常為215g/㎡，轉化膜形成后，必須用清水清洗，然后用熱風干燥，以增強膜層的硬度。

After completing the previous steps, we also need to perform chemical transformation treatment on it. We need its surface to form a dense and uniform continuous thin film. The process treatment in this step is equivalent to phosphating treatment, but they use different solutions. The conversion film of the electronic casing of the chassis machine is based on chromic acid/hydrochloric acid, phosphoric acid/hydrochloric acid, and hydrofluoric acid. The quality of the conversion film is usually 215g/㎡. After the formation of the conversion film, it must be cleaned with clean water and then dried with hot air to enhance the hardness of the film layer.

　　總之，一個的機箱機柜產品必須要有美觀性，外觀也是給客戶的印象，這一點很重要。試想，你是客戶去購置機箱發現其表面臟兮兮的，肯定不會有好印象，所以，細節是成就事業必不可少的部分！

In short, a perfect chassis and cabinet product must have aesthetics, and the appearance is also the first impression that gives customers, which is very important. Imagine if you were a customer who purchased a computer case and found its surface dirty, you wouldn't have a good impression, so details are an essential part of achieving success!

以上是關于 濟南機箱機柜 的介紹，若想了解相關知識可請點擊： http://www.n13b.com 我們將會全心全意為您提供滿分服務，歡迎您的來電！

The above is an introduction to Jinan chassis and cabinets. If you want to learn more about related knowledge, please click: http://www.n13b.com We will wholeheartedly provide you with full score service. Welcome to call us!